What you'll need
As an Amazon Associate we earn from qualifying purchases.
Read the maintenance section for the exact model on the rating label. It tells you which parts are intended for owner cleaning, which filters can be washed, how to route the drain and what clearance the unit needs.
What to prioritize first
Separate the removable filter, bucket and exposed grille from the internal coil and fan. Record the manufacturer’s cleaning procedure and reminder for each owner-accessible part. Follow the manual’s power-disconnection instructions before cleaning. If the procedure calls for removing a panel or accessing internal components, check the manufacturer’s service instructions.
Filters, grilles and coils: what to check and when to stop
The Midea Cube manual illustrates the distinction. Its care section describes unplugging the unit, cleaning the external grille, hand-cleaning the bucket, and washing and drying the removable filters. Those directions apply to the listed Cube models. Use the instructions for your own model when they differ.
Drainage and placement
Check the manual for the supported drain type, hose routing, and intake and exhaust clearances. Match the instructions to bucket, gravity-drain or pump operation. If the unit leaks, ices repeatedly, makes a new mechanical noise, or needs access behind a service panel, use its troubleshooting instructions and manufacturer service contact.
A maintenance record to keep beside the unit
| Record | Where to find it |
|---|---|
| Full model and revision | Rating label |
| Filter cleaning method and reminder | Care section of the exact manual |
| Bucket, hose and pump checks | Instructions for the drain mode in use |
| Intake and exhaust clearance | Placement diagram |
| Internal coil or fan service | Manufacturer support or service instructions |
What one maker’s manual says, step by step
The Midea Cube user manual is Midea’s own document and covers the MAD20S1QWT, MAD35S1QWT, MAD35PS1QGR, MAD50S1QWT, MAD50PS1QWT and MAD50PS1QGR. Other brands and models differ, so use this as an example of what a manual specifies, not as a rule for every dehumidifier.
| Task | What the Midea Cube manual says |
|---|---|
| Before any cleaning | Turn the unit off and unplug it |
| Air filters | The safety notes say to clean the filter once every two weeks. Pull each filter out, wash it with clean water, dry it, reinstall it and reset the filter indicator. Do not run the unit without the filters |
| Grille and case | Wipe with water and a mild detergent, with no bleach or abrasives. Do not splash water onto the unit. Vacuum or brush the air intake and outlet if they get dirty |
| Bucket | Clean it every few weeks with mild detergent and water. Do not put it in a dishwasher |
| Pump draining (pump models) | Empty the bucket at least once a week when using the pump. Do not run an outdoor hose at or below 32°F (0°C), because the water freezes and blocks it |
| Continuous drain | Place the unit above the sink or drain, with the hose sloped down. The manual suggests the hose end sit 4 inches below the hose connection |
| Frost on the coils | The troubleshooting table calls this normal and says the unit has an auto-defrost feature |
| Room temperature | The manual lists a working range of 41°F to 95°F (5°C to 35°C) and lists a room below 41°F as a reason the unit may not dry the air |
| Long storage | Let the unit rest for a full day to dry out, clean the unit, bucket and filters, tuck in the cord, nest the unit in the empty bucket, cover it with a plastic bag and store it upright in a dry, ventilated place |
Source: Midea Cube user manual (pages on safety, operating, care and cleaning, and troubleshooting), checked November 8, 2026.
For help choosing between a portable unit and a larger installation, see the dehumidifier setup comparison .